Wood Chip Dryer Manufacturer in Mexico
See how we dry Wood ChipLooking for wood chip dryer manufacturers in Mexico? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to Mexico — see the regulatory and economic context below.
We build FlowDrya wood chip dryers to order at STRONGA's Hertfordshire works and ship them to Mexican sawmills, foresters and energy users, though no FlowDrya woodchip line is commissioned for this material in the country yet. Drying matters because green chip carries far too much water to burn or store well; reducing it from around 65 per cent moisture to a low, even level below 20 per cent raises the calorific value, halts fungal degradation in the pile and lets the chip be sold as a graded solid biofuel against EN ISO 17225-4. As industry and cement kilns look to trim coal and petroleum coke, a dried domestic wood fuel feeds straight into that demand rather than a niche market.
Supplying Mexico
We supply Mexico from our Hertfordshire works — we have no documented Wood Chip installation in Mexico yet. Our FlowDrya projects in Mexico to date cover other materials:
Regulatory context
The General Law for the Prevention and Integral Management of Waste (Ley General para la Prevención y Gestión Integral de los Residuos, LGPGIR) is Mexico's framework federal statute for waste. It builds management on a priority order — prevention, reduction, reuse, recycling and valorización, which expressly covers both material and energy recovery, ahead of final disposal — so an operation that dries wet residue into a fuel or a soil product ranks above burial in the legal hierarchy rather than heading for a relleno sanitario or open tiradero.
Source: https://www.gob.mx/profepa/documentos/ley-general-para-la-prevencion-y-gestion-integral-de-los-residuos-62914 · checked 2026-08
A producer that sorts, treats or stores waste to make a refuse- or solid-recovered fuel is handling residuos de manejo especial. NOM-161-SEMARNAT-2011 sets the criteria that classify these special-management wastes and determine which are subject to a plan de manejo (management plan), and it binds large generators — those producing 10 tonnes a year or more — to operate under an approved plan.
Source: https://www.dof.gob.mx/nota_detalle.php?codigo=5286505&fecha=01/02/2013 · checked 2026-08
Where the residue is composted or aerobically treated, the national standard NMX-AA-180-SCFI-2018 sets the methods and quality parameters for treating the organic fraction of urban and special-management solid waste and for the resulting compost, while Mexico City additionally applies NADF-020-AMBT-2011 to the quality of composta produced or distributed in the capital. A dried, stabilised feedstock is easier to hold within these quality bands.
Source: https://platiica.economia.gob.mx/normalizacion/nmx-aa-180-scfi-2018/ · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, NOM-004-SEMARNAT-2002 (biosolids), NMX-AA-180-SCFI-2018 (aerobic organic-waste treatment).
Economic context
Mexico levies a federal carbon tax on fossil fuels under the IEPS (Impuesto Especial sobre Producción y Servicios), charged on their carbon content; its effective cost averages about 53 pesos per tonne of CO2 across fuels and it reaches coal, petroleum coke, fuel oil, diesel and gasoline while natural gas is exempt. Several states — among them Zacatecas, the State of Mexico, Querétaro and Durango — add their own state carbon taxes. Displacing coal or petroleum coke with a dried waste- or biomass-derived fuel therefore avoids a real per-tonne charge that natural-gas heat does not carry.
Source: https://fundar.org.mx/guia-para-entender-el-impuesto-federal-al-carbono-en-mexico/ · checked 2026-08
Bought-in power is a real cost: Mexican industrial and business electricity runs at roughly 4.088 pesos per kWh (about 0.235 US dollars), so a drying system built around recovered kiln, boiler or process heat rather than grid electricity protects the operating margin.
Source: https://www.globalpetrolprices.com/Mexico/electricity_prices/ · checked 2026-08
Worked illustration (assumptions stated):
Dried wood fuel competes directly with coal, and in Mexico coal-fired heat now carries a federal carbon tax averaging about 53 pesos per tonne of CO2, from which natural gas is exempt – so a biomass boiler running on graded chip avoids a real, rising liability as well as the fuel bill. The cement sector's appetite is proven: CEMEX co-processes biomass and waste at about 36 per cent substitution, past the CANACEM 32 per cent target for 2030. Grid power is dear at roughly 4.088 pesos per kWh, so running the FlowDrya on recovered heat from a kiln, boiler or flue keeps drying cheap, and a consistent dry chip carts economically because the water weight is gone. Assumptions: fuel prices, heat source and offtake vary by site.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
Wood Chip Dryer Manufacturer in Mexico — FAQ
Is there a FlowDrya woodchip installation here?
Not for this material yet. We will not claim a local reference we lack; our proven woodchip, bark and digestate lines run in Britain, and our delivered project in the country is the Enval plastic-packaging dryer near Mexico City.
Why dry wood chip rather than air-dry it?
Air-drying is slow, weather-dependent and loses dry matter to rot. A FlowDrya takes green chip to a controlled low moisture in a continuous flow, protecting the calorific value and giving a buyer a consistent grade year-round.
Who buys dried wood chip here?
Biomass boilers for process heat, cement kilns cutting coal and petroleum coke, and pellet and panel producers all want a consistent, low-moisture furnish they can meter reliably.
Does drying help against the carbon tax?
Yes. Burning graded chip in place of coal cuts emissions taxed at about 53 pesos per tonne of CO2, and because natural gas is untaxed, pairing recovered gas or process heat with a wood fuel keeps both the fuel bill and the tax down.
What standard should dried chip meet?
Woodchip for combustion is graded against EN ISO 17225-4 on particle size and moisture; a stable low moisture keeps each batch within its declared class, which boiler operators require for predictable output.
Can the dryer run without buying grid power?
It can be integrated with a heat source such as a biomass boiler or kiln exhaust, so the drying energy comes from recovered heat rather than expensive grid electricity.