Municipal Solid Waste Dryer Manufacturer in France
See how we dry Solid WasteLooking for MSW dryer manufacturers in France? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to France — see the regulatory and economic context below.
FlowDrya solid-waste dryers are engineered to order at STRONGA's Hertfordshire works and supplied to waste managers and municipalities here, though no solid-waste line is yet documented on French soil. Mixed municipal and commercial residues are exactly the streams French policy is squeezing out of the ground: Article L541-1 of the Code de l'environnement targets halving landfilled non-hazardous waste by 2025 against 2010, and the loi AGEC reinforces that push toward recovery. Drying the wet, mixed fraction on the FlowDrya's deep, agitated bed drives off water, stabilises the material and lifts its calorific value, so what would once have been buried becomes a combustible solide de récupération a cement kiln can take. The moving floor tolerates the coarse, heterogeneous nature of solid waste.
Supplying France
We supply France from our Hertfordshire works — we have no documented Solid Waste installation in France yet.
Regulatory context
Article L541-1 of the Code de l'environnement is the backbone of French waste law and transposes the EU Waste Framework Directive. It fixes a five-step hierarchy — prevention, preparation for re-use, recycling, other recovery including energy recovery, and disposal only as a last resort — and sets a statutory target to cut the tonnage of non-hazardous, non-inert waste sent to landfill by 50 per cent in 2025 against the 2010 level. Drying a wet residue into a fuel or a soil product is a recovery operation that ranks above burial in that legal order and helps a site meet the diversion goal.
Source: https://www.legifrance.gouv.fr/codes/article_lc/LEGIARTI000042176062/ · checked 2026-08
The loi anti-gaspillage pour une économie circulaire (loi AGEC, law no. 2020-105 of 10 February 2020) reinforces that direction across the whole economy, expanding extended-producer-responsibility schemes and steering material away from disposal toward re-use and recovery. For an operator turning a wet by-product into a marketable fuel or fertiliser, the AGEC framework strengthens the policy pull that already favours drying and valorisation over sending residue to a décharge.
Source: https://www.legifrance.gouv.fr/jorf/id/JORFTEXT000041553759/ · checked 2026-08
France created a dedicated regulatory category for burning waste-derived fuel: the arrêté of 23 May 2016 governs installations producing heat and/or electricity from combustibles solides de récupération (CSR — the French term covering RDF and SRF) under heading 2971 of the installations classées pour la protection de l'environnement (ICPE) nomenclature. The rules require the CSR to be a prepared, specified fuel, so a low, documented moisture is exactly what lets a dried fuel supply a licensed CSR boiler or cement kiln.
Source: https://www.legifrance.gouv.fr/loda/id/JORFTEXT000032575814 · checked 2026-08
Compost and digestate sold as agricultural inputs in France must satisfy the mandatory standard NF U 44-051 on organic soil amendments, or be individually homologated, which fixes the permitted raw materials, maturity and contaminant limits a product must hold. A conforming material ceases to be a waste (sortie du statut de déchet) and can be traded like any other amendment; a dried, stabilised feedstock holds those quality limits far more easily than a wet, actively degrading one.
Source: https://aida.ineris.fr/reglementation/circulaire-270209-concernant-lentree-application-norme-nfu-44-051-relative · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, NF U 44-051 (organic soil amendments).
Economic context
France taxes landfill heavily through the déchets component of the taxe générale sur les activités polluantes (TGAP). From 1 January 2025 the standard TGAP rate for non-hazardous waste sent to a storage (landfill) facility is 65 euros per tonne, and the reduced rates that used to soften it have been withdrawn — a large, rising cost that pushes wet, divertible material toward drying and recovery rather than burial.
Source: https://bofip.impots.gouv.fr/bofip/13305-PGP.html/identifiant=BOI-TCA-POLL-40-30-20250723 · checked 2026-08
France also prices carbon on fossil fuels through the composante carbone built into the domestic energy tax (TICPE), valued at 44.60 euros per tonne of CO2 and frozen at that level since 2018 after the gilets jaunes protests halted its planned rise. Heavy industry sits additionally under the EU Emissions Trading System, so displacing coal or petroleum coke with a dried waste- or biomass-derived fuel avoids a real per-tonne carbon cost.
Source: https://www.connaissancedesenergies.org/questions-et-reponses-energies/quel-est-le-montant-de-la-taxe-carbone-en-france · checked 2026-08
French cement kilns are among Europe's heaviest users of alternative fuel: the industry body France Ciment reports that combustibles de substitution — waste-derived CSR and biomass — covered 52 per cent of the sector's thermal energy on 2023 data, with the biomass-bearing waste prioritised. That underpins deep domestic demand for a dried, specification-consistent fuel offering a low, even moisture and a documented calorific value.
Source: https://www.france-ciment.fr/enjeux/energie/ · checked 2026-08
Worked illustration (assumptions stated):
Domestic economics reward diversion above all. Burial is expensive and getting more so: the TGAP charges 65 euros per tonne on non-hazardous waste sent to a storage facility, and the reduced rates that once softened it have been withdrawn. The combustible fraction, once dried, has a ready home – cement kilns here cover 52 per cent of their thermal energy with substitute fuels – and displacing coal there avoids the composante carbone of 44.60 euros per tonne of CO2. Producing that fuel takes heat, but drying on recovered process or kiln heat beats the grid. A wet, mixed residue is a disposal cost; a dried, higher-calorific fraction is a saleable fuel. Assumptions: gate fees, heat source and offtake govern the payback.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
Municipal Solid Waste Dryer Manufacturer in France — FAQ
Do you have a solid-waste dryer here yet?
No, and we will not imply one. Each FlowDrya is built to order in Hertfordshire and commissioned on site; our documented references run the identical platform a waste manager here would receive.
Why does the TGAP matter?
The landfill component of the TGAP makes burying non-hazardous waste expensive at 65 euros per tonne, so diverting the combustible fraction into a dried fuel avoids a rising cost while creating a saleable product.
Where does the AGEC framework fit?
The loi AGEC and the Code de l'environnement rank recovery above disposal and target a steep cut in landfilled waste. Drying a wet residue into a fuel or a sortable feed is a recovery step that sits above burial in that legal order.
What can dried solid waste become?
A combustible solide de récupération for cement kilns and CSR boilers, or a drier, more separable feed for materials recovery. A low, even moisture is what makes both routes workable.
Does the FlowDrya handle coarse mixed waste?
Yes. The hydraulic moving floor conveys and tumbles a coarse, contrary mix on a deep bed without the blockages that beset augers and belts, drying it evenly across the deck.
How is a solid-waste dryer delivered and commissioned?
Each dryer is fully assembled and factory-tested at our works, then dismantled for freight and rebuilt on arrival. It is connected to the chosen heat supply and brought online through a structured start-up, shutdown and supervised trial, with operator training provided before handover.