SRF Dryer Manufacturer in the Netherlands
See how we dry SRFLooking for SRF dryers manufacturers in the Netherlands? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to the Netherlands — see the regulatory and economic context below.
FlowDrya SRF dryers are built to order at STRONGA's Hertfordshire works and supplied to Dutch fuel producers and co-incineration off-takers, though no FlowDrya line is yet commissioned locally. Solid recovered fuel is the graded, higher-specification cousin of RDF, made to a tighter calorific and chlorine standard so cement kilns and industrial furnaces will burn it in place of coal or petcoke. What lets an SRF hold that grade is a low, even moisture: a wet fuel has a suppressed and erratic calorific value that fails the specification. Drying the fuel toward 15 per cent moisture stabilises the energy content, so it can carry an EN ISO 21640 classification and a licensed off-take contract.
Supplying the Netherlands
We supply the Netherlands from our Hertfordshire works — we have no documented SRF installation in the Netherlands yet.
Regulatory context
Dutch waste law is framed by the Wet milieubeheer (Environmental Management Act), whose article 10.4 binds the minister, provinces and municipalities to a priority order for waste: prevention first, then preparation for re-use, recycling, other useful application including energy recovery, and safe disposal only as a last resort. Turning a wet residue into a fuel or a stabilised soil product is a form of recovery the act ranks above disposal, so drying supports the legal duty to move material up that hierarchy rather than down it.
Source: https://wetten.overheid.nl/BWBR0003245 · checked 2026-08
The Besluit stortplaatsen en stortverboden afvalstoffen bans a long list of waste streams from landfill: any waste that can be recycled or incinerated, including biowaste and other combustible and recoverable fractions, may not be buried. Because cheap disposal to landfill is closed off, wet combustible and organic residues have to be recovered as a fuel or a soil product instead, and a low, even moisture is what lets that residue hold a specification an off-taker will accept.
Source: https://business.gov.nl/regulations/dumping-sites/ · checked 2026-08
Alongside the EU Emissions Trading System, the Netherlands runs a national CO2-heffing industrie on industrial and waste-incineration installations. For 2026 the levy is set at 78.67 euros per tonne of CO2 for ETS installations and 103.66 euros per tonne for waste-incineration plants; because the reference EU ETS price of 79.42 euros already exceeds the national rate, the extra levy payable by an ETS installation for 2026 works out at zero, but the framework keeps a firm floor under the carbon cost of burning fossil fuel or unrecovered waste.
Source: https://www.emissieautoriteit.nl/regelgeving/co2-heffing/tarieven-co2-heffing · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, Keurcompost quality classes (BRL Keurcompost).
Economic context
Burying or burning waste both carry the afvalstoffenbelasting (waste tax). From 1 January 2026 the rate is 40.85 euros per 1,000 kilograms, charged on waste sent to landfill or to an incinerator, and it is legislated to climb to 90.21 euros per tonne in 2028 and 113.81 euros per tonne in 2035. Recycled material is exempt, so every tonne of wet residue dried into a recoverable fuel or a saleable soil product escapes a rising per-tonne charge.
Source: https://www.belastingdienst.nl/wps/wcm/connect/bldcontentnl/belastingdienst/zakelijk/overige_belastingen/belastingen_op_milieugrondslag/afvalstoffenbelasting/tarief_afvalstoffenbelasting · checked 2026-08
Bought-in power is a real cost. Eurostat put the EU average non-household electricity price at 0.1837 euros per kWh in the second half of 2025, and Dutch industry sits around that level rather than below it. Boiling water off with grid electricity is therefore uneconomic, which rewards a dryer designed to run on recovered kiln, boiler or exhaust heat and very little electrical power.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-2 · checked 2026-08
Industrial gas is likewise a burden. Eurostat put the EU average non-household natural gas price at 0.0605 euros per kWh in the second half of 2025, and the Netherlands was one of only four EU member states where that price rose year on year, up 6.3 per cent. Running a dryer on a site's own surplus or recovered heat rather than bought-in gas therefore protects the operating margin.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-3 · checked 2026-08
The Netherlands landfills almost nothing and leans heavily on energy-from-waste, so a clean, consistent solid fuel has a ready outlet; but because both incineration and landfill are taxed, and even waste sent abroad for burning attracts the levy, it pays to upgrade combustible residue into a specification fuel rather than to feed wet, variable waste into an incinerator. A dried fraction with a low, even moisture is exactly what a licensed co-incineration off-taker can accept in place of fossil fuel.
Source: https://business.gov.nl/regulations/landfill-tax/ · checked 2026-08
Worked illustration (assumptions stated):
Two levies frame the case. Both incineration and landfill carry the afvalstoffenbelasting of 40.85 euros per tonne, and a waste-incineration plant additionally pays a national CO2-heffing of 103.66 euros per tonne of CO2 in 2026. A dried, specification SRF that displaces fossil fuel in a kiln avoids the carbon charge and earns a fuel price, where a wet, out-of-spec fuel is only a cost to dispose of. FlowDrya dries on recovered kiln or flue heat and, cycling its moving floor, draws far less electricity than a belt dryer, which matters where grid power sits near the EU average of 0.1837 euros per kWh. Assumptions stated: specification, calorific value and off-take govern the payback.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
SRF Dryer Manufacturer in the Netherlands — FAQ
Do you have an SRF dryer here?
Not yet, and we will not imply one. Every FlowDrya is built to order in Hertfordshire; the platform is the same continuous-flow dryer proven on our British reference sites.
What is the difference between RDF and SRF?
SRF is graded to the EN ISO 21640 standard, with tighter calorific and chlorine limits than RDF, so a wider range of kilns and furnaces will accept it. A low, even moisture is what lets a fuel hold that grade.
How does drying help SRF meet specification?
Driving the fuel toward 15 per cent moisture lifts and steadies its calorific value, so it repeatably meets the classification and the contract an off-taker requires.
What levies does drying help avoid?
A dried SRF that displaces fossil fuel avoids the 103.66 euro per tonne CO2-heffing on incineration and earns a fuel price, rather than incurring the 40.85 euro per tonne waste tax on disposal.
What heat source suits an SRF dryer?
Recovered kiln or flue heat is the economic choice, because grid electricity around the EU average of 0.1837 euros per kWh makes electric drying uneconomic.
How is a plant shipped and commissioned from the UK?
Each dryer is fully assembled and factory-tested at our works, then dismantled for freight, rebuilt on arrival, connected to the heat supply and brought online through a supervised trial before handover.
Which off-takers accept a dried SRF, and why does consistency matter?
Cement and lime kilns, industrial furnaces and dedicated power boilers are the usual buyers, and they value predictable chlorine, ash and moisture figures. An unstable fuel disrupts clinker chemistry and flame temperature, forcing operators to derate or blend cautiously; a uniformly dried, densified product protects their process, so it commands a firmer offtake and a better price. Consistent pieces also feed cleanly through the plant's conveyors and dosing gear rather than bridging.