SRF Dryer Manufacturer in Canada
See how we dry SRFLooking for SRF dryers manufacturers in Canada? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to Canada — see the regulatory and economic context below.
We manufacture FlowDrya SRF drying plants to order at STRONGA's Hertfordshire factory and ship them to domestic producers; in the interest of honesty, we operate no documented SRF drying reference here yet. Solid recovered fuel is the tightly specified cousin of RDF: to trade it and to have a cement or lime kiln accept it, the fuel must hold a declared class under EN ISO 21640, and a stable low moisture below 15% is what makes the net-calorific-value, chlorine and particle-size classes repeatable. That same consistency is what a Canadian kiln operator needs before committing to a high thermal-substitution rate under a rising carbon price.
Supplying Canada
We supply Canada from our Hertfordshire works — we have no documented SRF installation in Canada yet.
Regulatory context
Waste management is largely a provincial responsibility, so a plant that stores, treats or dries a waste-derived material is authorised under provincial law — for example British Columbia's Environmental Management Act and its Organic Matter Recycling Regulation, or Ontario's Environmental Protection Act — and the exact permitting a drying or fuel-preparation site faces varies by province rather than being set by a single national rule.
Source: https://www2.gov.bc.ca/gov/content/environment/waste-management/food-and-organic-waste/regulations-guidelines · checked 2026-08
The federal consumer fuel charge was set to zero on 1 April 2025, but federal industrial carbon pricing continues to apply to large emitters through the Output-Based Pricing System, so cement kilns, lime kilns and energy-from-waste plants still carry a price on their fossil-fuel combustion — an ongoing incentive to substitute conventional fuel with a dried, waste-derived alternative.
Source: https://www.canada.ca/en/department-finance/news/2025/03/removing-the-consumer-carbon-price-effective-april-1-2025.html · checked 2026-08
Provincial policy is steadily diverting organic material away from disposal: Ontario's Food and Organic Waste Framework directs municipalities and businesses to collect and recover organics, while Quebec is phasing out the landfilling and incineration of organic materials and extending organics collection to households, institutions and industry — pressure that pushes wet residues toward stabilisation, composting and anaerobic digestion.
Source: https://www.ontario.ca/page/food-and-organic-waste-framework · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, CCME Guidelines for Compost Quality, CAN/BNQ 0413-200 compost standards.
Economic context
At Metro Vancouver's regional solid-waste facilities the garbage tipping fee is CAD 148 per tonne for municipal garbage and CAD 162 per tonne for commercial loads of 1 to 7.99 tonnes (rates in effect 2026), and loads containing banned recyclable or organic material attract a surcharge — so avoiding disposal is a real and rising saving.
Source: https://metrovancouver.org/services/solid-waste/tipping-fee · checked 2026-08
The federal industrial carbon price (the Output-Based Pricing System excess-emissions charge) is CAD 95 per tonne of CO2e in 2025 and rises by CAD 15 each year — to CAD 110 in 2026 and CAD 170 by 2030 — which steadily improves the economics of displacing coal or petroleum coke in a kiln with a dried, waste-derived fuel.
Source: https://icapcarbonaction.com/en/ets/canada-federal-output-based-pricing-system · checked 2026-08
The Alberta AECO-C benchmark natural-gas price is forecast at CAD 2.71 per gigajoule for 2025 (Alberta Energy Regulator) — inexpensive by international standards, which favours drying systems built around gas-fired or recovered process heat rather than electric heating.
Source: https://www.aer.ca/data-and-performance-reports/statistical-reports/alberta-energy-outlook-st98/prices-and-capital-expenditure/natural-gas-prices/aeco-c-price · checked 2026-08
Industrial electricity prices differ sharply by province: hydro-rich Quebec, Manitoba and British Columbia are among the lowest-priced jurisdictions in North America, while Alberta, Saskatchewan, Ontario and the Maritimes pay considerably more (Canada Energy Regulator) — so a dryer that runs on recovered heat and draws little grid power protects the operating margin wherever it is sited.
Source: https://www.cer-rec.gc.ca/en/data-analysis/energy-markets/market-snapshots/2026/market-snapshot-how-much-do-your-neighbours-across-canada-pay-for-electricity.html · checked 2026-08
Domestic cement producers are a growing home for waste-derived fuel: Lafarge's Richmond, British Columbia plant aims to replace 50 per cent or more of its fossil-fuel use with non-recyclable by-products, and co-processing waste-derived biomass and other alternative fuels cuts emissions by roughly 20 to 30 per cent per tonne of coal displaced — creating real demand for a consistent, dried, high-calorific fuel.
Source: https://natural-resources.canada.ca/funding-partnerships/lafarge-canada-low-carbon-fuel-technology-expansion · checked 2026-08
Worked illustration (assumptions stated):
SRF economics reward specification discipline. A producer able to guarantee an EN ISO 21640 class commands a better offtake price than one shipping damp, variable material, and a fuel above 20 MJ/kg widens the pool of kilns willing to burn it. Set against a rising federal carbon charge – CAD 110 per tonne of CO2e in 2026, reaching CAD 170 by 2030 – every tonne of coal displaced grows more valuable, and Lafarge's Richmond plant in British Columbia already targets 50 per cent fossil-fuel replacement. Because a dryer designed around gas near CAD 2.71 per gigajoule or recovered kiln heat beats electric elements, that is the economical route to reach and hold the target class. Assumptions: these are reference prices, not a site quotation.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
SRF Dryer Manufacturer in Canada — FAQ
Do you supply SRF dryers here?
Yes. FlowDrya SRF dryers are engineered and assembled in Hertfordshire, factory-tested before shipping, and commissioned on the customer's site with operator training and a full hot test before handover.
How does drying help SRF meet EN ISO 21640?
Moisture drives net calorific value, and an unstable moisture content pushes a batch between classes. By conditioning the fuel to a repeatable low moisture, FlowDrya helps a producer declare and hold a class a kiln operator will accept.
Do you have an SRF installation here?
Not for SRF. Rather than imply a reference we lack, we point customers to our documented bark, digestate and woodchip projects in Britain, which prove the identical drying technology on comparable heterogeneous feedstocks.
How does SRF differ from RDF for a kiln operator?
SRF is the refined, quality-assured grade – sorted, shredded and dried to a declared specification – whereas RDF is a cruder, more variable output. Kiln operators pay more for the predictability a classified fuel brings.
Can one plant switch between fuel grades?
Yes. By adjusting residence time and air temperature, a single FlowDrya can condition both coarser refuse fuel and tightly specified solid recovered fuel, giving a producer flexibility as offtake contracts change.
What drives demand for SRF in a kiln here?
A rising federal carbon price and provincial diversion of waste from landfill push kilns to replace coal and petroleum coke with a consistent, classified, low-moisture fuel.