Municipal Solid Waste Dryer Manufacturer in the Netherlands
See how we dry Solid WasteLooking for MSW dryer manufacturers in the Netherlands? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to the Netherlands — see the regulatory and economic context below.
FlowDrya solid waste dryers are built to order at STRONGA's Hertfordshire works and supplied to Dutch waste operators and material-recovery businesses, though no FlowDrya line is yet commissioned locally. Mixed solid waste and its screened fractions arrive wet – commonly around 45 per cent moisture – which drags down calorific value, fouls sorting and makes the material heavy to move. In a market that buries almost nothing and recovers energy from the rest, drying the combustible fraction toward 15 to 35 per cent lifts its heating value and lets clean recyclables be separated, so more of each tonne becomes a fuel or a recovered material rather than an incinerator feed that still carries water.
Supplying the Netherlands
We supply the Netherlands from our Hertfordshire works — we have no documented Solid Waste installation in the Netherlands yet.
Regulatory context
Dutch waste law is framed by the Wet milieubeheer (Environmental Management Act), whose article 10.4 binds the minister, provinces and municipalities to a priority order for waste: prevention first, then preparation for re-use, recycling, other useful application including energy recovery, and safe disposal only as a last resort. Turning a wet residue into a fuel or a stabilised soil product is a form of recovery the act ranks above disposal, so drying supports the legal duty to move material up that hierarchy rather than down it.
Source: https://wetten.overheid.nl/BWBR0003245 · checked 2026-08
The Besluit stortplaatsen en stortverboden afvalstoffen bans a long list of waste streams from landfill: any waste that can be recycled or incinerated, including biowaste and other combustible and recoverable fractions, may not be buried. Because cheap disposal to landfill is closed off, wet combustible and organic residues have to be recovered as a fuel or a soil product instead, and a low, even moisture is what lets that residue hold a specification an off-taker will accept.
Source: https://business.gov.nl/regulations/dumping-sites/ · checked 2026-08
Alongside the EU Emissions Trading System, the Netherlands runs a national CO2-heffing industrie on industrial and waste-incineration installations. For 2026 the levy is set at 78.67 euros per tonne of CO2 for ETS installations and 103.66 euros per tonne for waste-incineration plants; because the reference EU ETS price of 79.42 euros already exceeds the national rate, the extra levy payable by an ETS installation for 2026 works out at zero, but the framework keeps a firm floor under the carbon cost of burning fossil fuel or unrecovered waste.
Source: https://www.emissieautoriteit.nl/regelgeving/co2-heffing/tarieven-co2-heffing · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, Keurcompost quality classes (BRL Keurcompost).
Economic context
Burying or burning waste both carry the afvalstoffenbelasting (waste tax). From 1 January 2026 the rate is 40.85 euros per 1,000 kilograms, charged on waste sent to landfill or to an incinerator, and it is legislated to climb to 90.21 euros per tonne in 2028 and 113.81 euros per tonne in 2035. Recycled material is exempt, so every tonne of wet residue dried into a recoverable fuel or a saleable soil product escapes a rising per-tonne charge.
Source: https://www.belastingdienst.nl/wps/wcm/connect/bldcontentnl/belastingdienst/zakelijk/overige_belastingen/belastingen_op_milieugrondslag/afvalstoffenbelasting/tarief_afvalstoffenbelasting · checked 2026-08
Bought-in power is a real cost. Eurostat put the EU average non-household electricity price at 0.1837 euros per kWh in the second half of 2025, and Dutch industry sits around that level rather than below it. Boiling water off with grid electricity is therefore uneconomic, which rewards a dryer designed to run on recovered kiln, boiler or exhaust heat and very little electrical power.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-2 · checked 2026-08
Industrial gas is likewise a burden. Eurostat put the EU average non-household natural gas price at 0.0605 euros per kWh in the second half of 2025, and the Netherlands was one of only four EU member states where that price rose year on year, up 6.3 per cent. Running a dryer on a site's own surplus or recovered heat rather than bought-in gas therefore protects the operating margin.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-3 · checked 2026-08
The Netherlands landfills almost nothing and leans heavily on energy-from-waste, so a clean, consistent solid fuel has a ready outlet; but because both incineration and landfill are taxed, and even waste sent abroad for burning attracts the levy, it pays to upgrade combustible residue into a specification fuel rather than to feed wet, variable waste into an incinerator. A dried fraction with a low, even moisture is exactly what a licensed co-incineration off-taker can accept in place of fossil fuel.
Source: https://business.gov.nl/regulations/landfill-tax/ · checked 2026-08
Worked illustration (assumptions stated):
The charges reward recovery over disposal. Both landfill and incineration carry the afvalstoffenbelasting of 40.85 euros per tonne, and waste-incineration plants also pay a national CO2-heffing of 103.66 euros per tonne of CO2 in 2026, while the landfill ban closes cheap burial entirely. Drying and upgrading the combustible fraction into a specification fuel that displaces coal or petcoke avoids the carbon charge and earns a fuel price; drier input also improves the separation of metals and inert material for recycling, which is exempt from the waste tax. FlowDrya dries on recovered heat and draws little grid power, near the EU average of 0.1837 euros per kWh. Assumptions stated: composition, calorific value and off-take govern the payback.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
Municipal Solid Waste Dryer Manufacturer in the Netherlands — FAQ
Do you have a solid waste dryer here?
Not yet, and we will not imply one. Every FlowDrya is built to order in Hertfordshire; the platform is the same continuous-flow dryer proven on our British reference sites.
Why dry solid waste?
Mixed waste around 45 per cent moisture has a low, erratic calorific value and sorts poorly. Drying the combustible fraction toward 15 to 35 per cent raises its heating value and improves the recovery of clean recyclables.
What levies does drying help avoid?
A specification fuel that displaces fossil energy avoids the 103.66 euro per tonne CO2-heffing on incineration and the 40.85 euro per tonne waste tax, while separated recyclables are exempt from the tax.
Does the landfill ban affect solid waste?
Yes. Combustible and recyclable waste is banned from landfill, so the material must be recovered as a fuel or a recyclate rather than buried, which is what a drying and sorting step enables.
What heat source suits a solid waste dryer?
Recovered heat is the economic choice, because grid electricity around the EU average of 0.1837 euros per kWh makes electric drying uneconomic.
How is a plant shipped and commissioned from the UK?
Each dryer is fully assembled and factory-tested at our works, then dismantled for freight, rebuilt on arrival, connected to the heat supply and brought online through a supervised trial before handover.
How does drying improve material recovery?
Wet fines cling to metals, glass and plastics and blind the screens, so eddy-current and magnetic separators mis-sort and recyclable value is lost. Taking the moisture out frees the particles, sharpens every separation stage and lifts both the yield and the cleanliness of the recovered streams, turning more of each load into saleable commodities rather than residue.