Municipal Solid Waste Dryer Manufacturer in Germany
See how we dry Solid WasteLooking for MSW dryer manufacturers in Germany? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to Germany — see the regulatory and economic context below.
FlowDrya solid waste dryers are engineered to order at STRONGA's Hertfordshire works and supplied to German waste processors, though no FlowDrya solid-waste line is documented in the country yet. Since 2005 untreated municipal waste cannot be landfilled here: it must pass through incineration or mechanical-biological treatment first, and drying the mixed residue is central to that recovery. A wet, mixed solid waste — often 45% moisture or higher — burns poorly and blocks handling gear; drying it to a low, even moisture stabilises the material and lifts its calorific value so the combustible fraction becomes a usable fuel under the Kreislaufwirtschaftsgesetz recovery hierarchy. FlowDrya's robust moving floor takes the coarse, contrary mix that mixed waste presents.
Supplying Germany
We supply Germany from our Hertfordshire works — we have no documented Solid Waste installation in Germany yet.
Regulatory context
The Kreislaufwirtschaftsgesetz (KrWG, Circular Economy Act) is Germany's framework waste statute and transposes the EU Waste Framework Directive into national law. Its section 6 fixes a five-step waste hierarchy — prevention, preparation for re-use, recycling, other recovery including energy recovery, and only then disposal — so an operation that dries wet residue into a fuel or a soil product counts as recovery and ranks above burial in the legal order rather than heading for a landfill.
Source: https://www.gesetze-im-internet.de/krwg/ · checked 2026-08
Since 2005 Germany has banned the landfilling of untreated municipal and high-organic-content waste. Under the Deponieverordnung (Landfill Ordinance) household-like waste must be pre-treated — by incineration or mechanical-biological treatment, and held below strict limits on organic-substance content — before any residual may be buried, which closes off cheap disposal and pushes wet, biodegradable residues toward drying and recovery.
Source: https://www.umweltbundesamt.de/en/topics/waste-resources/waste-disposal/landfill · checked 2026-08
Burning waste-derived and biomass fuels — including co-incineration alongside clinker in cement kilns and in power plants — is regulated by the 17. BImSchV, the ordinance on the incineration and co-incineration of waste, which sets the emission limits that such a plant must meet. A dried Ersatzbrennstoff with a consistent low moisture and a documented quality is exactly what these licensed co-incineration installations can accept in place of fossil fuel.
Source: https://www.gesetze-im-internet.de/bimschv_17_2013/ · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, RAL quality assurance for compost and digestate (BGK).
Economic context
Germany prices carbon on heating and transport fuels through its national emissions trading scheme (nEHS) under the Fuel Emissions Trading Act (BEHG): the fixed price rose from 25 euros per tonne of CO2 in 2021 to 55 euros in 2025, and from 2026 certificates are auctioned within a corridor of 55 to 65 euros, with coal covered since 2023 and waste fuels from 2024. This sits alongside the EU Emissions Trading System for heavy industry, so displacing coal or petcoke with a dried waste- or biomass-derived fuel avoids a real and rising per-tonne charge.
Source: https://www.dehst.de/EN/Topics/nEHS/understanding-nEHS/understanding-nehs_artikel.html · checked 2026-08
The German cement industry is one of the world's heaviest users of alternative fuel, which underpins deep domestic demand for a dried, specification-consistent Ersatzbrennstoff: VDZ environmental data put the sector's thermal substitution rate at around 74 per cent, roughly one third of that biomass. That demand rewards a low, even moisture and a documented calorific value.
Source: https://www.vdz-online.de/en/news-1/vdzs-environmental-data-2023-published · checked 2026-08
Bought-in power is a real cost: Eurostat put Germany's non-household (industrial) electricity price at 0.2264 euros per kWh in the second half of 2025, among the highest in the EU, which favours drying systems built around recovered kiln, boiler or flue heat rather than grid electricity.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-2 · checked 2026-08
Industrial gas is likewise expensive: Eurostat put the German non-household natural gas price at 0.0713 euros per kWh in the second half of 2025, again among the highest in the EU, so running a dryer on a site's own combined-heat surplus rather than bought-in gas protects the operating margin.
Source: https://ec.europa.eu/eurostat/web/products-eurostat-news/w/ddn-20260508-3 · checked 2026-08
Worked illustration (assumptions stated):
The German case rests on avoided disposal and a fuel offtake. With untreated waste barred from landfill since 2005, the recovered combustible fraction has a home in the cement sector, which substitutes about 74 per cent of its kiln fuel with alternative fuels. Burning that fuel in place of coal also dodges the national carbon price of 55 euros per tonne of CO2 in 2025, rising to a 55-to-65-euro auction corridor from 2026. Drying is energy-hungry, and with industrial power at 0.2264 euros per kWh and gas at 0.0713 euros per kWh, it only pays on recovered heat. A dried, stabilised solid waste also weighs and travels less, cutting the haulage on every tonne handled. Assumptions: gate fee, fuel offtake and heat source vary site by site.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
Municipal Solid Waste Dryer Manufacturer in Germany — FAQ
Do you supply solid waste dryers in Germany?
Yes, from Hertfordshire. We hold no commissioned solid-waste line in the country yet and will not imply one; the FlowDrya platform matches that on our British reference sites.
Why is drying part of waste treatment here?
Since 2005 untreated municipal waste cannot be buried; it must be treated by incineration or mechanical-biological treatment. Drying the mixed residue stabilises it and raises its calorific value, turning the combustible fraction into a recovered fuel rather than a disposal problem.
What moisture does mixed solid waste need?
The combustible fraction is dried to a low, even moisture — commonly below 20% — because water depresses the net calorific value and a fuel buyer sets a moisture ceiling. FlowDrya is configured to that target.
Does the dryer handle a coarse, mixed feed?
Yes. The hydraulic moving floor conveys and tumbles a heavy, oversized and contrary mix across the deck without the blockages that stop auger and belt systems.
What happens to the dried fuel?
The dried combustible fraction is co-incinerated as an Ersatzbrennstoff in cement kilns and power plants under the 17. BImSchV emission limits, displacing fossil fuel in an established market.
How much can drying cut the tonnage sent for disposal?
Because water is the heaviest part of a wet mixed waste, removing it sharply reduces the mass a processor must move, store and pay to handle. Lighter, drier residue means fewer vehicle movements, lower haulage bills and a smaller reject stream heading anywhere costly.