RDF Dryer Manufacturer in Canada
See how we dry RDFLooking for RDF dryers manufacturers in Canada? STRONGA builds FlowDrya lines to order at its Hertfordshire works and supplies them to Canada — see the regulatory and economic context below.
FlowDrya RDF drying plants are engineered and built to order at the STRONGA works in Hertfordshire, England, and shipped to Canadian customers, though we state plainly that no FlowDrya RDF line is documented here yet. Refuse-derived fuel matters to domestic decarbonisation: shredded municipal residue frequently reaches the processing line above 55% moisture, and cement and lime kilns reward a lighter, drier, higher-calorific feed. Conditioning the fuel beneath 20% moisture lifts net calorific value from under 10 MJ/kg toward about 18 MJ/kg, and it is that repeatability that lets a kiln burner hold steady combustion while displacing coal or petroleum coke.
Supplying Canada
We supply Canada from our Hertfordshire works — we have no documented RDF installation in Canada yet.
Regulatory context
Waste management is largely a provincial responsibility, so a plant that stores, treats or dries a waste-derived material is authorised under provincial law — for example British Columbia's Environmental Management Act and its Organic Matter Recycling Regulation, or Ontario's Environmental Protection Act — and the exact permitting a drying or fuel-preparation site faces varies by province rather than being set by a single national rule.
Source: https://www2.gov.bc.ca/gov/content/environment/waste-management/food-and-organic-waste/regulations-guidelines · checked 2026-08
The federal consumer fuel charge was set to zero on 1 April 2025, but federal industrial carbon pricing continues to apply to large emitters through the Output-Based Pricing System, so cement kilns, lime kilns and energy-from-waste plants still carry a price on their fossil-fuel combustion — an ongoing incentive to substitute conventional fuel with a dried, waste-derived alternative.
Source: https://www.canada.ca/en/department-finance/news/2025/03/removing-the-consumer-carbon-price-effective-april-1-2025.html · checked 2026-08
Provincial policy is steadily diverting organic material away from disposal: Ontario's Food and Organic Waste Framework directs municipalities and businesses to collect and recover organics, while Quebec is phasing out the landfilling and incineration of organic materials and extending organics collection to households, institutions and industry — pressure that pushes wet residues toward stabilisation, composting and anaerobic digestion.
Source: https://www.ontario.ca/page/food-and-organic-waste-framework · checked 2026-08
Applicable standards: EN ISO 21640, EN ISO 17225-4, EN ISO 18134, CCME Guidelines for Compost Quality, CAN/BNQ 0413-200 compost standards.
Economic context
At Metro Vancouver's regional solid-waste facilities the garbage tipping fee is CAD 148 per tonne for municipal garbage and CAD 162 per tonne for commercial loads of 1 to 7.99 tonnes (rates in effect 2026), and loads containing banned recyclable or organic material attract a surcharge — so avoiding disposal is a real and rising saving.
Source: https://metrovancouver.org/services/solid-waste/tipping-fee · checked 2026-08
The federal industrial carbon price (the Output-Based Pricing System excess-emissions charge) is CAD 95 per tonne of CO2e in 2025 and rises by CAD 15 each year — to CAD 110 in 2026 and CAD 170 by 2030 — which steadily improves the economics of displacing coal or petroleum coke in a kiln with a dried, waste-derived fuel.
Source: https://icapcarbonaction.com/en/ets/canada-federal-output-based-pricing-system · checked 2026-08
The Alberta AECO-C benchmark natural-gas price is forecast at CAD 2.71 per gigajoule for 2025 (Alberta Energy Regulator) — inexpensive by international standards, which favours drying systems built around gas-fired or recovered process heat rather than electric heating.
Source: https://www.aer.ca/data-and-performance-reports/statistical-reports/alberta-energy-outlook-st98/prices-and-capital-expenditure/natural-gas-prices/aeco-c-price · checked 2026-08
Industrial electricity prices differ sharply by province: hydro-rich Quebec, Manitoba and British Columbia are among the lowest-priced jurisdictions in North America, while Alberta, Saskatchewan, Ontario and the Maritimes pay considerably more (Canada Energy Regulator) — so a dryer that runs on recovered heat and draws little grid power protects the operating margin wherever it is sited.
Source: https://www.cer-rec.gc.ca/en/data-analysis/energy-markets/market-snapshots/2026/market-snapshot-how-much-do-your-neighbours-across-canada-pay-for-electricity.html · checked 2026-08
Domestic cement producers are a growing home for waste-derived fuel: Lafarge's Richmond, British Columbia plant aims to replace 50 per cent or more of its fossil-fuel use with non-recyclable by-products, and co-processing waste-derived biomass and other alternative fuels cuts emissions by roughly 20 to 30 per cent per tonne of coal displaced — creating real demand for a consistent, dried, high-calorific fuel.
Source: https://natural-resources.canada.ca/funding-partnerships/lafarge-canada-low-carbon-fuel-technology-expansion · checked 2026-08
Worked illustration (assumptions stated):
The domestic argument turns on avoided disposal, a rising carbon price and kiln demand. With a Metro Vancouver tipping fee of CAD 162 per tonne on commercial loads, every tonne diverted into kiln fuel earns its keep. The federal Output-Based Pricing System charges large emitters CAD 110 per tonne of CO2e in 2026, climbing to CAD 170 by 2030, so each tonne of coal a dried fuel displaces is worth more each year; Lafarge's Richmond plant in British Columbia already targets replacing 50 per cent or more of its fossil fuel with non-recyclable by-products. Feeding the dryer on recovered pre-calciner heat, or gas near CAD 2.71 per gigajoule, is far cheaper than boiling off water with electric power. Assumptions: gate fees, heat source and cement offtake govern the true payback.
Figures are indicative and were last reviewed August 2026; energy and disposal prices move — contact us for a current assessment.
RDF Dryer Manufacturer in Canada — FAQ
Do you supply RDF dryers here?
We do. Every FlowDrya RDF dryer is manufactured to order in Hertfordshire, factory-tested, then shipped and commissioned on the customer's site; installation is typically completed within days, followed by operator training and a full hot test before handover.
How does drying help RDF find a home in a kiln?
A cement or lime kiln accepts an alternative fuel only when it is consistent, dry and well-specified. Conditioning refuse fuel to a low, stable moisture steadies the calorific value so the burner runs predictably and the thermal-substitution rate can rise.
Do you have an RDF installation here yet?
No – and we will not imply one. Our nearest documented FlowDrya projects dry bark, digestate fibre and woodchips in Britain, and each runs the same PulseWave moving-floor platform a domestic refuse-fuel plant would receive.
Which buyers take dried RDF domestically?
Cement and lime kilns and energy-from-waste plants are the usual homes, all preferring a lighter, higher-calorific, uniform feed that steadies the burner, raises the thermal-substitution rate and cuts rejected loads.
Why does moisture matter so much for calorific value?
Water carried into the burner is boiled off before any useful heat is released, so damp residue near 55% moisture wastes energy. Drying below 20% concentrates the combustible fraction and lifts calorific value toward 18 MJ/kg.
How is a plant shipped and commissioned from the UK?
The dryer is fully assembled and tested at the factory, then broken down for freight. On arrival it is reassembled, connected to the site's heat source and brought online through a supervised start-up, shutdown and trial run before handover.